Create a Dynamic Poster You Can Use for Night Clubs

Step 1

create a new file with a width of 1278 px and a height of 900 px at 150 dpi (Dots per Inch).Fill it with black color.

Step 2

Ok now Make a new layer and name it “Space brush” Use the space brush you downloaded, paint a few space patterns/objects around the canvas:

Now reduce the opacity to 25 %.

Add more space nebulas to our canvas .

Now add vector mask from the bottom of layers palette .
Now activate Brush tool (B) with these settings :
Brush size: 400px
Hardness: 0%
Opacity: 40%
Flow: 100%
Color: #000000
Now paint over the highlighted area.

The result should be similar to this:

Step 3

Ok now Make a new layer and name it “Smoke” Use the Smoke brush set you downloaded, paint a few smoke around the canvas:

The result should be similar to this:

Add more smoke in our canvas with different layers.

Now select one of the smoke layer which we have created and then hit (CTRL+T) then make a right click and select warp and play with the shape of our smoke layer .See as below :

Follow the same step and add more smoke effects.

Ok now Make a new layer and name it “Particles” Use the Debris Brush you downloaded, paint a few smoke around the canvas and take #92886f as your fill color .

Next, activate the Transform tool (Ctrl/Cmd +T), then while the “Particles” layer is selected and then resize it as shown below:

Follow the same process and add more particles to our canvas.

Step 4

Now use one of the space brushes which we have downloaded earlier and then open the RockJagged0016 image and then make a new layer above RockJagged0016 layer and paint on that layer then hit (Ctrl+Click) on that layer to make it selected then select the RockJagged0016 and hit (ctrl+c) and copy that painted area.See as below

Now go back to our canvas and make a new layer and name it “rocks” and hit (Ctrl+v) and paste the copied part of RockJagged0016 image.

Now hit (Ctrl+l) to open Levels adjustment layer .
When the Levels box opens, input the following:

Follow the same process and add more rocks to our canvas.Remember every layer should be seprate.

Step 5

Now for this time select a bigger space brush and copy a larger part of the rock image and paste it to our canvas.

Again use levels adjustment layer.

The result should be similar to this:

Now select all the rock layer and hit (Ctrl+e) and merge.

Step 6

Now use Curves adjustment layer.See as below:

Click on the mask of Curves adjustment layer.
Now activate Brush tool (B) with these settings :
Brush size: 400px
Hardness: 0%
Opacity: 40%
Flow: 100%
Color: #000000
Now paint over the highlighted area.

The result should be similar to this:

Step 7

Now open the Nightclub dancer stock and removie it from the background with the help of pen tool.

Step 8

Now open the wolf stock.

Now activate pen tool (p) and make a random selection around the wolf and make a duplicate of it.

Now go to the channels palette and make a copy of red layer.

Now activate Brush tool (B) with these settings :
Brush size: 400px
Hardness: 0%
Opacity: 40%
Flow: 100%
Color: #ffffff
Now paint over the highlighted area (The red copy layer should be selected).

The result should be similar to this:

Now press ctrl and click on the copied red layer to make our wolf selected.

Now go back to the wolf copy layer and hit (ctrl+j) to make a duplicate of it.

Now again select out duplicated wolf layer and open Refine Edge tool.
When the Refine Edge box opens, input the following:

Step 9

Now drag the extracted wolf layer to our dancer window.

Now add vector mask from the bottom of layers palette .
Now activate Brush tool (B) with these settings :
Brush size: 400px
Hardness: 0%
Opacity: 40%
Flow: 100%
Color: #000000
Now paint over the highlighted area.

Now select the lancer layer.
Now add vector mask from the bottom of layers palette .
Now activate Brush tool (B) with these settings :
Brush size: 400px
Hardness: 0%
Opacity: 40%
Flow: 100%
Color: #000000
Now paint over the highlighted area.

The result should be similar to this:

Step 10

Now we will add some fur to our wolf.
So first change the color of background to any dark color so we can easy see our furs.

Now use fur brush which we have downloaded.See as below
Use ink drop tool to select the color tone of wolfs hair.

Have patience and work as much as you can over this particular step because it will improve your digital painting skills.
The result should be similar to this:

Step 11

Now merge wolf and dancer layer and drag them to our main canvas and name the layer “wolf fancer”.
As you can see i have further worked on our wolf by adding different color tones you can also expriment with the color tones and the leanth of the fur.

Now add a vector mask to our wold dancer layer and use 15 grunge ps brushe to hide some of it’s areas.

The result should be similar to this:

Make a duplicate of wolf layer and change it’s layer mode to “Multiply” and opacity to 65%.

Step 12

Now open Space texture which we have downloaded.

Change it’s layer mode to “Screen”.

Make a duplicate of space texture and move it to the right.See as below :

Step 13

Now we are going to set the atmosphere or you can say mood of our scene.
Note this these few adjustment layer are going to be on the top of every layer.
So first create a Selective color adjustment layer which can be found by pressing on the Create New Fill/Adjustment layer button shown on the layer window:
When the Selective color box opens, input the following:



The result should be similar to this:

Step 14

Now select the mask of selective color layer.
Now activate Brush tool (B) with these settings :
Brush size: 400px
Hardness: 0%
Opacity: 40%
Flow: 100%
Color: #000000
Now paint over the highlighted area.

The result should be similar to this:

Step 15

Now create a color balance adjustment layer which can be found by pressing on the Create New Fill/Adjustment layer button shown on the layer window:
When the color balance box opens, input the following:



The result should be similar to this:

Step 16

Now select the mask of color balance layer.
Now activate Brush tool (B) with these settings :
Brush size: 400px
Hardness: 0%
Opacity: 40%
Flow: 100%
Color: #000000
Now paint over the highlighted area.

The result should be similar to this:

Step 17

Now create a curves adjustment layer which can be found by pressing on the Create New Fill/Adjustment layer button shown on the layer window:
When the curves box opens, input the following:

The result should be similar to this:

Step 18

Now we will work on the text part of our tutorial.
Now Select rectangular marquee tool and make a selection and fill it with #070606 color and reduce it’s opacity to 65% and name it “Text base overlay”.

Now install DevilBreezeDemi,Medium,light fonts in your computer we are going to use these fonts.
So write Above the Text base overlay.

Add more text to our canvas like Dj names or other details.

Step 19

Now Type “DYNAMIC” .

Now open Layer style and fill every this as shown bellow.




The result should be similar to this:

Repeat the same process and add more text.

Step 20

Now open a new canvas wish a size of 800 width and 800 height.
Fill it with #000000 color .

Now activate pen tool and make a rectangular shape and fill it with “edef4b” color .

Insert the mask on the layer by choosing Add layer mask on the bottom part of the Layers panel and choose the Soft Round brush of black color.

Repeat the same process and make more strips .

Try different colors.

When you got satisfied with the result mearge them togather and drag to our canvas.

Change it’s layer mode to LINER BURN.

The result should be similar to this:

Step 21

Create a new layer and name it “geometric shapes”.Then activate pen tool (p)and create a triangle selection.we’re going to fill it with a radial gradient.

Now grab the Gradient Tool (G), set it to Radial, and change the Opacity to 5%. Also, make sure the Transparency option is selected. Now, let’s have some fun with filling this triangle, you can add several shots of gradient to this triangle, then the color will be harder.



Use the same method and create lots of triangles, sample different colors and apply some gradients. You can merge a pack of triangles, duplicate them (Command + J) and rotate (Command + T) to get some messy results.

The result should be similar to this:

Step 22

Grab the Brush Tool (B), reset your brush settings, and make your brush rounded. Set the Hardness to 0%, Opacity to 100% and Flow to 5%. Pick color #f8ff7c, create a new layer above those triangles, name it “light1.” Change this layer’s Blending Mode to Overlay. Now start with a small brush, then add bigger and bigger dots in this place. Switch to white color and repeat the same process, but on a new layer (with Overlay Blending Mode).
You can apply those triangles and lights to every spot of this design, it’s adds a nice touch of abstraction.